The 80 percent circuit guideline, in watts
ESFI's booklet gives a simple equation: volts times amps equals watts. A 15-amp, 120-volt circuit can carry 1,800 watts in total. ESFI then says not to exceed 80 percent of that capacity, which is 1,440 watts. On a 20-amp circuit, 80 percent is 1,920 watts.
Updated .
Add light strings on the Christmas lights calculator, or read why one outlet is not a second circuit. Cord gauge is on the extension cord page.
At a glance
| Circuit at 120 V | 80 percent guideline |
|---|---|
| 15 amp | 1,440 watts |
| 20 amp | 1,920 watts |
| Full 15-amp rating | 1,800 watts, not the planning figure |
ESFI's indoor electrical-safety booklet gives a simple equation: volts times amps equals watts. A 15-amp circuit in a 120-volt system can carry 1,800 watts in total. ESFI then says it is not recommended that you exceed 80 percent of that capacity at any given time, which is 1,440 watts. On a 20-amp, 120-volt circuit, the full rating is 2,400 watts and 80 percent is 1,920 watts.
Compare a load with the guideline
Holiday lights that stay on for hours are a continuous load. The 80 percent figure is the one to plan around, not the number stamped on the breaker. This tool cannot see what else is already on the same circuit in another room.
When to call a licensed electrician
Call if breakers trip repeatedly, outlets or cords feel hot, you smell a hot-plastic odor, or you are planning to add outdoor outlets so you can stop relying on extension cords. Do not replace a fuse or breaker with a higher rating to keep decorations running.
Sources
Common questions
Why use 80 percent instead of the breaker rating?
Holiday lights that stay on for hours are a continuous load. The 80 percent figure is the one to plan around, not the number stamped on the breaker.
Can this tool see what else is on the circuit?
No. If two rooms go dark when one breaker trips, they share a circuit, and everything on both sides counts.
When should I call a licensed electrician?
Call if breakers trip repeatedly, outlets or cords feel hot, you smell a hot-plastic odor, or you want outdoor outlets so you can stop relying on extension cords. Do not replace a fuse or breaker with a higher rating to keep decorations running.
How do I know if a room is 15 amp or 20 amp?
Look at the breaker label. This tool uses the rating you enter; it cannot inspect the panel for you.